Home
E-mail
Home Page
Who We Are
Products
Accessories
Fairs
Contact Us
Via Togliatti, 29 - 20066 Melzo (MI)
Phone +39 02 95.73.11.79
Fax +39 02 95.73.18.87

E-mail: info@vespasabbiatrici.com

Sandblasting Machines
Special sandblasting machines
Sandblasting machine with recovery
Blast rooms
Treatments for internal tubes
Everblast and Special Plants
Filters for the dust elimination
Under pressure tanks for painting
P.L.C. drivers cabinets
Guantled blasting cabinet
Glass and marble plants
Pneumatic vacuum cleaner
Tanks of naval units treatments TANK COATING
 
ACCESSORIES
   


UNDERPRESSURE TANK FOR PAINTING


Under pressure tanks UNDER PRESSURE TANKS FOR PAINTING
PED Directive 97/23 CE tested at the pressure of 4 bar

Made ready with a reduction unit of pressure for the connection to a spray gun and manual agitator (without inside bucket) and an outlet on the cover.

Mod. VBP1O/4 100-010 without agitator
Mod. VBP 25/4 100-025
Mod. VBP 50/4 100-050
Mod. VBP65/4 100-065
Mod. VBP100/4 100-100


Sandblasting Machines sell
 Made ready with with a pressure regulator unit for the connection to a spray gun and manual agitator (without inside bucket) and a bottom side gate with valve.

Mod. VBP25/4 I 100-104
Mod. VBP5O/4 I 100-105
Mod. VBP 65/4 I 100-106
Mod. VBP100/4 I 100-110


INSIDE PAINT POT
 

110-253 INSIDE PAINT POT IN NYLON only for VBP 25/3

110-025 INSIDE PAINT POT IN GALVANIZED SHEET IRON for tanks with capacity of lt 25

110-050 INSIDE PAINT POT IN GALVANIZED SHEET IRON for tanks with capacity of lt 50

110-065 SECCHIO INTERNO IN LAMIERA ZINCATA per serbatoi. Capacità lt. 65

110-100 INSIDE PAINT POT IN GALVANIZED SHEET IRON for tanks with capacity of lt 100


On Request:

PORTABLE MIXER FOR PAINTS
with pneumatic motor 0,25 Hp without hoses

Agitator with pneumatic motor type GAST and lubricator

Double pressure regulator and two gates for lt. 25- 50 -100

PED Directive 97/23 CE tested at the exercise pressure of 6 Bar

Cod. 110-009


SPRAY GUN AND HOSE SET FOR AIR MIXED PAINTING
type W-77 complete with mt. 15 of air-paint hose
Cod. 110-010
type Ecco 40 complete with mt. 15 of air-paint hose
Cod. 110-011

SPRAY GUN FOR AIR MIXED PAINTING
type W-77 - Cod. 110-012

SPRAY GUN FOR AIR MIXED PAINTING
type Ecco 40 - Cod. 110-013


GASKET

RUBBER GASKET FOR COVER
Capacity It. 25 Cod. 110-003
Capacity lt. 50 - 100 Cod. 110-004

LEATHER GASKET FOR COVER
Capacity It. 25 Cod. 110-005
Capacity It. 50-100 Cod. 110-006

VITON GASKET FOR COVER
Capacity; It. 25 Cod. 110-007
Capacity lt. 50-100 Cod. 110-008


PNEUMATIC PROPUSOR FOR SPRAY APPLICATIONS OF MIDDLE AND HIGH VISCOSITY LIQUID PRODUCTS
 
STUDIED FOR THE APPLICATION OF INSULATING MORTARS AND LIQUID MATERIALS OF REINFORCEMENT
 
The propulsor is made up of an under pressure tank type VBP 50/6 with PED Directive 97/23 CE standard test, made ready with:
  • Charge’s valve with funnel
  • pressure regulator and safety valve
  • product gate interception valve
   
The propulsor can be connected to a lance for the painting of high viscosity products or to a lance for the injection of fluent reinforcement products.


TECHNICAL DATA
Maximum exercise pressure of tank
 :6 BAR
Required air for painting lance of
high viscosity products
 : LT/min 2.5000 press. 6 BAR
Required air for a injection lance of fluent
products for reinforcement
 : LT/min 500 press. 6 BAR


SPECIAL APPLICATIONS