|
| SANDBLASTING MACHINES WITH RECOVERY |
| |
PNEUMATIC SANDER WITH RECOVERY
Mod. MISTRAL |
|
| TECHNICAL CHARACTERISTICS |
| DIMENSIONS |
| LENGHT |
MM 1.500 |
| WIDTH |
MM 730 |
| HEIGHT |
MM 1.800 |
| STANDARD LENGHT OF TUBES |
MT 10 |
| MAX LENGHT OF TUBES |
MT 30 |
| WEIGHT |
KG 320 |
| REQUESTED AIR AT 7 BAR |
MC/MIN. 8 |
| NOZZLE DIAMETER |
MM 6,5 |
| CAPACITY OF PRODUCTION |
| SANDBLASTING ON PLATE IN STEEL |
4-6 MQ/H DEGREE SA 2,5 |
SANDBLASTING ON CONCRETE
|
10-12 MW/H |
|
It was studied to make operations of sandblasting without dust on big manufactured articles, the machine is equipped with plane and angular brushes to work on the various surfaces.
On request it can be equipped with motorized carrier head trailer, that is particularly suitable for the treatment of very large plane surfaces such as floors of sheds, decks of naval units, roofs of big tanks etc.
Vespa is the best choice for SANDBLASTING
|
| |
Complete with:
- Pressure tank
- Blast head with immediate recovery of abrasive
- Sorter of abrasive
- Pneumatic ejector group of suction
- Filter with self-cleaning cartridges
- Standard ducts for sandblasting and suction, lenght mt. 10
|
PRESSURIZED ELECTROPNEUMATIC SANDER WITH RECOVERY
"DELTA"
|
| |
The blasting machine unit DELTA is "PED 97/23/CE tested" with pressure vessel launch system, self cleaning filtration unit, blast head complete of standard 5 mt. length blast/suction hoses.
|
|
PORTABLE, USABLE EVERYWHERE WITHOUT MAKE DUST AND PREPARING WORKSITE. DUE TO THE MANY REGULATIONS POSSIBILITY, DELTA IS MADE FIT FOR DECORATIONS, WRITING ON GLASS, MARBLE, CERAMIC, PLASTIC MATERIALS, FOR PAINTING PREPARATION AND PAINT STRIPPING.
|
Technical
characteristics |
|
Dimensions:
|
length 1.100 x width 500 x h 1.530 |
| Electric power: |
kw 2,2 - 220 v. monophase |
| Nozzle dimensions: |
Ø 4 |
Air consumption:
|
l/min. 1.154 at 7 bar |
Tank capacity:
|
l 25 |
PRESSURIZED ELECTROPNEUMATIC SANDER WITH RECOVERY
"BETA"
|
|
DESIGNED FOR MADE WORKS WITHOUT MAKE DUST. THE MACHINE HAS GOT WITH SEMIAUTOMATIC FILTER CLEANING SYSTEM. BOTH THE ELECTRIC RECOVERY FAN AND PRESSURIZED LAUNCH SYSTEM PERMIT TO OBTAIN A GOOD PERFORMANCE WITH A LOW AIR CONSUMPTION.
DUE TO THE MANY REGULATION POSSIBILITY "BETA" IS MADE FIT FOR SHIP MAINTENANCE, WALL GRAFFIT CLEANING, WOOD OR MARBLE RESTORATION.
IT IS MADE FIT FOR DECORATIONS, WRITING FOR GLASS, MARBLE, CERAMIC, PLASTIC MATERIALS AND PREPARATION OF METALS FOR PAINTING AND PAINT STRIPPING. |
| Technical
characteristics |
|
| Power: |
KW 1,1 |
| Tension: |
220V 50HZ |
| Compressed air required: |
MIN. 700 LT/MINUTE PRESSURE 4 BAR
MAX 1.200 LT/MINUTE PRESSURE 8 BAR |
| Abrasive suggested: |
GLASS BEADS, ALUMINIUM OXIDE, GRINDED WALNUT
SHELL |
SANDER WITH RECOVERY BY SUCTION
"VEGA 50" |
| |
It is particularly suitable for works of garnish on glass, marble and plastic materials, little works of sandblasting on metallic surfaces, restoration of wood, marble etc.
Sander with recovery of abrasive by suction complete of trailer-mounted tank for the abrasive material and lance for sandblasting with steel nozzle. |
|
| TECHNICAL CHARACTERISTICS |
| LANCE LENGHT |
MT 30 |
| INSTALLED POWER |
W 1.000 |
VOLTAGE
|
220 V. 50 HZ. MONOPHASE |
| AIR CONSUMPTION |
1.000 LT/MIN |
| PRODUCTION CAPACITY |
1,5-2 MQ/H |
SUGGESTED ABRASIVE
|
ALUMINIUM OXIDE |
|
PORTABLE SANDER WITH RECOVERY
"EDUCT - O - MATIC" |
| |
Handy - safe - completely pneumatic - versatile high performance - compatible with the environment, adaptable to the operator's needs.
|
|
| TECHNICAL CHARACTERISTICS |
| WEIGHT |
JUST KG 3,5 |
| PERFORMANCES |
FROM 2 TO 5 MQ/H |
| AIR CONSUMPTION |
1.500 L/MIN AT THE PRESSURE OF 7 BAR |
| PACKAGING |
HAND TRASPORTABLE SUITCASE |
|
|
|
